Pl Sql Developer Oracle Client Not Properly Installed Oracle Home Key

Posted on

1.2.1 Windows Systems with JDK1.5. To install and start SQL Developer on a Windows system on which the Sun Java SDK release 1.5 is installed, follow these steps: Unzip the SQL Developer kit into a folder (directory) of your choice (for example, C:Program Files).This folder will be referred to as install. Unzipping the SQL Developer kit causes a folder named sqldeveloper to be. PL/SQL Developer connect to Oracle Database 32bit on the same computer. PL/SQL Developer connect to Oracle Database 64bit on the same computer. PL/SQL Developer connect to Oracle Database on another computer (your computer has installed Oracle) PL/SQL Developer connect to Oracle Database on another computer (your computer does not install Oracle).

Note:

This guide assumes that you plan to download the SQL Developer kit (.zip) file and install it as a freestanding tool.

If you plan to use SQL Developer as part of an Oracle Database release installation, see the Oracle Database installation documentation.

Please read the information in this chapter before you install Oracle SQL Developer. This chapter contains the following major sections: Waveform download.

1.1 SQL Developer System Recommendations

This section describes the recommended minimum values for CPU, memory, display, disk storage, and other resources on the supported systems.

Note:

SQL Developer requires JDK 7 or later, and Oracle recommends that you use the latest available JDK, which you can download from:

Table 1-1 Recommendations for Windows Systems

ResourceRecommended Minimum Value

Operating System

Windows XP-Service Pack 2

Windows 2003 R2

Windows Vista

Windows Server 2008

Windows 7

CPU Type and Speed

Pentium IV 2 GHz MHz or faster

Memory

1 GB RAM

Display

65536 colors, set to at least 1024 X 768 resolution

Hard Drive Space

42 MB if you already have JDK 7 or later

110 MB if you do not have JDK 7 or later

Java SDK

JDK 7 or later for Windows, available at: http://www.oracle.com/technetwork/java/javase/downloads/jdk7-downloads-1880260.html.


Table 1-2 Recommendations for Linux Systems

ResourceRecommended Minimum Value

Operating System

Red Hat Enterprise Linux 3.0

Fedora Core 4

CPU Type and Speed

Pentium IV 2 GHz or faster

Memory

1 GB RAM

Display

65536 colors, set to at least 1024 X 768 resolution

Hard Drive Space

110 MB

Java SDK

JDK 7 or later for Linux, available at: http://www.oracle.com/technetwork/java/javase/downloads/jdk7-downloads-1880260.html


Table 1-3 Recommendations for Mac OS X Systems

ResourceRecommended Minimum Value

Operating System

Apple Mac OS X Version 10.4.x

CPU Type and Speed

Dual 1.25 GHz G4/G5 (1 GHz G4 minimum)

Memory

1.5 GB RAM (1 GB minimum)

Display

'Thousands' of colors

Hard Drive Space

110 MB

Java SDK

JDK 7 or later


1.2 Installing and Starting SQL Developer

This section contains subsections with instructions for installing SQL Developer on all supported systems.

SQL Developer does not require an installer. To install SQL Developer, you will need an unzip tool. You can download a free, cross-platform unzip tool, Info-Zip, available at http://www.info-zip.org/.

Important:

Do not install SQL Developer into any existing ORACLE_HOME. You will not be able to uninstall it using Oracle Universal Installer.

Also, do not install SQL Developer into an existing sqldeveloper folder or directory. Either delete the existing sqldeveloper folder or directory first, or ensure that the new SQL Developer version is installed into a different location.

Important:

If you are using a prerelease (Early Adopter) version of SQL Developer, and if you want to be able to continue to use this prerelease version after installing the official release kit, you must unzip the official release kit into a different directory than the one used for the prerelease version.

If Oracle Database (Release 11 or later) is also installed, a version of SQL Developer is also included and is accessible through the menu system under Oracle. This version of SQL Developer is separate from any SQL Developer kit that you download and unzip on your own, so do not confuse the two, and do not unzip a kit over the SQL Developer files that are included with Oracle Database. Suggestion: Create a shortcut for the SQL Developer executable file that you install, and always use it to start SQL Developer.

Before you install SQL Developer, look at the remaining sections of this guide to see if you need to know or do anything else first.

The steps for installing SQL Developer depend on whether or not you will be using it on a Windows system that does not have Java SDK (JDK) release 7 or later installed:

  • For a Windows system with JDK release 7 or later installed, follow the instructions in Section 1.2.1.

  • For all other systems (Linux and Mac OS X systems, and Windows systems with no JDK release 7 or later installed), follow the instructions in Section 1.2.2.

1.2.1 Windows Systems

If a Windows 64-bit SQL Developer kit that includes JDK 7 is available, you can download and install that on a Windows 64-bit system, and SQL Developer will use the embedded JDK that is provided with that kit.

However, if you need or simply want to use a JDK on your Windows 64-bit system, you can install the JDK (if it is not already installed) and the Windows 32/64-bit SQL Developer kit, and SQL Developer will use the JDK that is installed on your system.

Note:

Do not install SQL Developer into an existing sqldeveloper folder. Either delete the existing sqldeveloper folder first, or ensure that the new SQL Developer version is installed into a different location.

To install on a Windows system, follow these steps:

  1. Go to the Oracle Technology Network page for SQL Developer at http://www.oracle.com/technetwork/developer-tools/sql-developer/

    Note:

    If a Windows 64-bit SQL Developer kit that includes JDK 7 is available, you can download and install that on a Windows 64-bit system, and SQL Developer will use the embedded JDK that is provided with that kit.

    However, if you need or simply want to use a JDK on your Windows 64-bit system, you can install the JDK (if it is not already installed) and the Windows 32/64-bit SQL Developer kit, and SQL Developer will use the JDK that is installed on your system.

  2. If you do not need or want to install a suitable Java Development Kit (JDK 7 or later), go to step 3. Otherwise, download and install the JDK as follows:

    1. On the SQL Developer Downloads page (http://www.oracle.com/technetwork/developer-tools/sql-developer/downloads/index.html), click the Download link next to SQL Developer requires JDK 7 or above.

    2. On the Java SE Development Kit 7 Downloads page, in the table of Java SE Development Kits, accept the Oracle Binary Code License Agreement for Java SE.

    3. Click the link for the download that you need (for example, the Windows x64 link for a Windows 64-bit system).

    4. Save the file anywhere on your system (such as a 'temp' folder).

    5. Install the JDK (for example, on Windows, double-click the .exe file name and follow the displayed instructions).

  3. On the Oracle Technology Network page for SQL Developer at http://www.oracle.com/technetwork/developer-tools/sql-developer/, click the Downloads tab (next to Overview).

  4. Read and accept the license agreement.

  5. Follow the instructions for downloading and installing SQL Developer.

The installation itself is simple. For example, on a Windows PC you can unzip the downloaded file into C:, which will create C:sqldeveloper with files and folders in and under it.

If you are asked to enter the full pathname for the JDK, click Browse and find it. For example, on a Windows system the path might have a name similar to C:Program FilesJavajdk1.7.0_51.

  1. Unzip the SQL Developer kit into a folder (directory) of your choice, which will be referred to as <sqldeveloper_install>. Ensure that the Use folder names option is checked when unzipping the kit.

    Unzipping the SQL Developer kit causes a folder named sqldeveloper to be created under the <sqldeveloper_install> folder. For example, if you unzip the kit into C:, the folder C:sqldeveloper is created, along with several subfolders under it.

  2. To start SQL Developer, go to <sqldeveloper_install>sqldeveloper, and double-click sqldeveloper.exe.

If you are asked to enter the full pathname for the JDK, click Browse and find java.exe. For example, the path might have a name similar to C:Program FilesJavajdk1.7.0_51.

After SQL Developer starts, you can connect to any database by right-clicking the Connections node in the Connections Navigator and selecting New Connection. Alternatively, if you have any exported connections (see Section 1.4 or Section 1.10), you can import these connections and use them.

You can learn about SQL Developer by clicking Help, then Table of Contents, and reading the help topics under SQL Developer Concepts and Usage.

1.2.2 Linux and Mac OS X Systems

SQL Developer requires that JDK 7 or later be installed on the system, and Oracle recommends that you install the latest available JDK version. If you need to install a JDK, go to http://www.oracle.com/technetwork/java/javase/downloads/jdk7-downloads-1880260.html.

Note:

Do not install SQL Developer into an existing sqldeveloper directory. Either delete the existing sqldeveloper directory first, or ensure that the new SQL Developer version is installed into a different location.

Note:

On Macintosh systems, a native Macintosh application in the form sqldeveloperxxx.tar.gz is provided. When it is expanded, it appears as a Macintosh application that can be put into the applications folder. If you choose to expand this file, it will replace any older sqldeveloper applications in that folder.

To install and start SQL Developer, follow these steps:

  1. Unzip the SQL Developer kit into a directory (folder) of your choice. (Ensure that the Use folder names option is checked when unzipping the kit.) This directory location will be referred to as <sqldeveloper_install>.

    Unzipping the SQL Developer kit causes a directory named sqldeveloper to be created under the <sqldeveloper_install> directory. It also causes many files and directories to be placed in and under that directory.

  2. To start SQL Developer, go to the sqldeveloper directory under the <sqldeveloper_install> directory, and run sh sqldeveloper.sh.

After SQL Developer starts, you can connect to any database by right-clicking the Connections node in the Connections Navigator and selecting New Connection. Alternatively, if you have any exported connections (see Section 1.4, 'Migrating Information from Previous Releases' or Section 1.10, 'Uninstalling SQL Developer'), you can import these connections and use them.

You can learn about SQL Developer by clicking Help, then Table of Contents, and reading the help topics under SQL Developer Concepts and Usage.

1.3 Migrating User Settings from a Previous Release

The first time you start SQL Developer after installing it or after adding any extensions, you are asked if you want to migrate your user settings from a previous release. (This occurs regardless of whether there was a previous release on your system.)

These settings refer to database connections, reports, and certain SQL Developer user preferences that you set in a previous version by clicking Tools and then Preferences. However, some user preferences are not saved, and you must respecify these using the new release.

To migrate user settings from a previous SQL Developer release:

  1. Unzip the kit for the current release so as to create a new sqldeveloper directory.

  2. When you start the SQL Developer current release, click Yes when asked if you want to migrate settings from a previous release.

  3. In the dialog box that is displayed, you can accept the default option to migrate the settings from the most recent SQL Developer installation. Or, if you want to migrate the settings from an earlier installation, you can click to show all builds and then select the desired one.

See also Section 1.4, 'Migrating Information from Previous Releases'.

1.4 Migrating Information from Previous Releases

If you have used a previous release of SQL Developer, you may want to preserve database connections that you have been using. To preserve database connections, save your existing database connections in an XML file. To save the connections, right-click the Connections node in the Connections Navigator and select Export Connections. After you complete the installation described in this guide, you can use those connections by right-clicking the Connections node in the Connections Navigator and selecting Import Connections

If you want to use any user-defined reports or the SQL history from a previous version, see Section 1.5 for information about where these are located. If you have user-defined reports and SQL history from Release 1.0, they are modified by any later SQL Developer release to a format that is different from and incompatible with Release 1.0.

SQL Developer preferences (specified by clicking Tools and then Preferences) from a prerelease version of the current release cannot currently be saved and reused; you must respecify any desired preferences.

Note:

If you want to uninstall your prerelease version of SQL Developer before installing this release, see Section 1.10, 'Uninstalling SQL Developer'.

1.5 Location of User-Related Information

SQL Developer stores user-related information in several places, with the specific location depending on the operating system and certain environment specifications. User-related information includes user-defined reports, user-defined snippets, SQL Worksheet history, code templates, and SQL Developer user preferences. In most cases, your user-related information is stored outside the SQL Developer installation directory hierarchy, so that it is preserved if you delete that directory and install a new version.

The user-related information is stored in or under the IDE_USER_DIR environment variable location, if defined; otherwise as indicated in Table 1-4, which shows the typical default locations (under a directory or in a file) for specific types of resources on different operating systems. (Note the period in the name of any directory named .sqldeveloper.)

Table 1-4 Default Locations for User-Related Information

Resource TypeSystem (Windows, Linux, or Mac OS X)

User-defined reports

Windows: C:Documents and Settings<user-name>Application DataSQL DeveloperUserReports.xml

Linux or Mac OS X: ~/.sqldeveloper/UserReports.xml

User-defined snippets

Windows: C:Documents and Settings<user-name>Application DataSQL DeveloperUserSnippets.xml

Linux: ~/.sqldeveloper/UserSnippets.xml

Mac OS X: /Users/<Your user>/Library/Application Support/ SQLDeveloper/UserSnippets.xml

SQL history

Windows: C:Documents and Settings<user-name>Application DataSQL DeveloperSqlHistory.xml

Linux: ~/.sqldeveloper/SqlHistory.xml

Mac OS X: /Users/<Your user>/Library/Application Support/ SQLDeveloper/ SqlHistory.xml

Code templates

Windows: C:Documents and Settings<user-name>Application DataSQL Developer CodeTemplate.xml

Linux: ~/.sqldeveloper/CodeTemplate.xml

Mac OS X: /Users/<Your user>/Library/Application Support/ SQLDeveloper/ CodeTemplate.xml

SQL Developer user preferences

Windows: C:Documents and Settings<user-name>Application DataSQL Developersystemn.n.n.n.n

Linux or Mac OS X: ~/.sqldeveloper/systemn.n.n.n.n


If you want to prevent other users from accessing your user-specific SQL Developer information, you must ensure that the appropriate permissions are set on the directory where that information is stored or on a directory above it in the path hierarchy. For example, on a Windows system you may want to ensure that the SQL Developer folder and the <user-name>Application DataSQL Developer folder under Documents and Settings are not sharable; and on a Linux or Mac OS X system you may want to ensure that the ~/.sqldeveloper directory is not world-readable.

1.6 Database Certification for SQL Developer (Oracle and Third-Party)

This section describes Oracle and non-Oracle (third-party) databases that are certified for use with SQL Developer.

Table 1-5 lists the Oracle database certifications.

Pl Sql Developer Oracle Client Not Properly Installed Oracle Home Key Fob

Table 1-5 Oracle Database Certification for SQL Developer

ProductReleases

Oracle Database

Oracle10g

Oracle11g

Oracle12c

Oracle Database Express Edition

Release 11.2


SQL Developer can be used to view metadata and data of several non-Oracle (third-party) databases. Table 1-6 lists the third-party database certifications.

Table 1-6 Non-Oracle (Third-Party) Database Certification for SQL Developer

DatabaseReleasesNotes

IBM DB2

DB2 UDB

DB2 7.x

DB2 8.x

DB2 9.x

For any DB2 release: db2jcc.jar and db2jcc_license_cu.jar files required; available from IBM.

Microsoft Access

Access 97

Access 2000

Access XP (2002)

Access 2003

Access 2007

For any Access release: no JDBC driver needed, but you must ensure read access to system tables in the .mdb file.

Microsoft SQL Server

SQL Server 7

SQL Server 2000

SQL Server 2005

SQL Server 2008

For any Microsoft SQL Server release: JDBC driver jtds-1.2.jar required; included in jtds-1.2-dist.zip available from sourceforge.net; also available through Help, Check for Updates.

MySQL

MySQL 3.x

MySQL 4.x

MySQL 5.x

For any MySQL release: JDBC driver required. For MySQL 5.x: mysql-connector-java-5.0.4-bin.jar, which is included in mysql-connector-java-5.0.4.zip; also available through Help, Check for Updates. (Do not use the latest MySQL driver 5.1.)

Sybase Adaptive Server

Sybase 12

Sybase 15

For any Sybase Adaptive Server release: JDBC driver jtds-1.2.jar required; included in jtds-1.2-dist.zip available from sourceforge.net; also available through Help, Check for Updates.

Teradata

Teradata 12

Teradata 13

JDBC driver files tdgssconfig.jar and terajdbc4.jar required; included (along with a readme.txt file) in the TeraJDBC__indep_indep.12.00.00.110.zip or TeraJDBC__indep_indep.12.00.00.110.tar download.


For information about creating and using connections to third-party databases, see the information about database connections in the SQL Developer online help or Oracle SQL Developer User's Guide.

1.7 Advanced Security for JDBC Connection to the Database

You are encouraged to use Oracle Advanced Security to secure a JDBC connection to the database. Both the JDBC OCI and the JDBC Thin drivers support at least some of the Oracle Advanced Security features. If you are using the OCI driver, you can set relevant parameters in the same way that you would in any Oracle client setting. The JDBC Thin driver supports the Oracle Advanced Security features through a set of Java classes included with the JDBC classes in a Java Archive (JAR) file and supports security parameter settings through Java properties objects.

1.8 Finding SQL Developer Accessibility Information

For the latest configuration information or for information on addressing accessibility and assistive technology issues, see the Oracle Accessibility FAQ at http://www.oracle.com/us/corporate/accessibility/faqs/.

Also, check the SQL Developer release notes (readme.txt file) to see if there are any currently known issues regarding accessibility.

1.9 Using a Screen Reader and Java Access Bridge with SQL Developer

Note:

Unless otherwise indicated, the information is this section also applies to Data Modeler and Data Miner.

To make the best use of our accessibility features, Oracle Corporation recommends the following minimum configuration:

  • Windows XP, Windows Vista

  • Java 7 Update 6

    Java 7 Update 6 includes the Java Access Bridge. For more information, including how to enable the Java Access Bridge, see: https://blogs.oracle.com/javaaccessibility/entry/java_se_7_update_6

    However, if you are using Java J2SE 1.6.0_24 or higher but before Java 7 Update 6, you must manually install Java Access Bridge 2.0.2 after you install the screen reader (if it is not already installed). Download Java Access Bridge for Windows version 2.0.2. The file you will download is accessbridge-2_0_2-fcs-bin-b06.zip. It is available from: http://www.oracle.com/technetwork/java/javase/tech/index-jsp-136191.html (Refer to the Java Access Bridge documentation available from this website for more information about installation and the Java Access Bridge.)

  • JAWS 12.0.522

Follow these steps to set up a screen reader and Java Access Bridge.

  1. Install the screen reader, if it is not already installed.

    Refer to the documentation for your screen reader for more information about installation.

  2. Install SQL Developer.

  3. If you are using Java J2SE 1.6.0_24 or higher but before Java 7 Update 6, go to Section 1.9.1, 'If You Need to Install Java Access Bridge' and follow the instructions there.

  4. Start your screen reader.

  5. Start SQL Developer by running the file sqldeveloper.exe located in the folder <sqldev_home>sqldevelopersqldevbin.

The preceding steps assume you are running Windows and using a Windows-based screen reader. A console window that contains error information (if any) will open first and then the main SQL Developer window will appear, after SQL Developer has started. Any messages that appear will not affect the functionality of SQL Developer.

1.9.1 If You Need to Install Java Access Bridge

If you are using Java J2SE 1.6.0_24 or later but before Java 7 Update 6, you must manually install Java Access Bridge 2.0.2 after you install the screen reader (if it is not already installed).

  1. Download Java Access Bridge for Windows version 2.0.2. The file you will download is accessbridge-2_0_2-fcs-bin-b06.zip. It is available from: http://www.oracle.com/technetwork/java/javase/tech/index-jsp-136191.html.

    Refer to the Java Access Bridge documentation available from this website for more information about installation and the Java Access Bridge.

  2. Extract (unzip) the contents to a folder, for example, accessbridge_home.

  3. Install Java Access Bridge by running Install.exe from the <accessbridge_home>installer folder.

    The installer first checks the JDK version for compatibility, then the Available Java virtual machines dialog displays.

  4. Click Search Disks. Then select to search only the drive that contains the SQL Developer build and the JDK version in the program files directory (if it exists).

    The search process can take a long time on a large disk with many instances of JDK or SQL Developer, or when searching multiple disks. However, unless you complete an exhaustive search of your disk, Access Bridge will not be optimally configured, and will not be correctly installed to all of the Java VMs on your system. After selecting the disk to search, click Search.

  5. Confirm that you want to install the Java Access Bridge into each of the Java virtual machines displayed in the dialog, by clicking Install in All.

  6. Click OK when you see the Installation Completed message.

  7. Confirm that the following files have been installed in the WinntSystem32 directory (or the equivalent Windows XP or Vista directory), or copy them from <accessbridge_home>installerfiles because they must be in the system path in order to work with SQL Developer:

    Note that the system directory is required in the PATH system variable.

    Note:

    In the remaining steps in this section, if you are using the SQL Developer kit that does not include a JDK (that is, if the kit file name ends in -no-jre-zip), replace <sqldev_home> with <jdev_home>.

  8. Confirm that the following files have been installed in the <sqldev_home>jdkjrelibext directory, or copy them from <accessbridge_home>installerfiles:

    Note:

    For Data Modeler, for this step and any remaining steps in this section that refer to <sqldev_home>, replace <sqldev_home> with <datamodeler_home>.

  9. Confirm that the file accessibility.properties has been installed in the <sqldev_home>jdkjrelib directory, or copy it from <accessbridge_home>installerfiles.

  10. Start your screen reader.

  11. Start SQL Developer by running the file sqldeveloper.exe located in the folder <sqldev_home>sqldevelopersqldevbin.

1.10 Uninstalling SQL Developer

Before you uninstall SQL Developer, if you plan to install SQL Developer (the same or an updated version) later, you may want to save your existing database connections; and if so, see Section 1.4 before uninstalling.

To uninstall SQL Developer, remove the entire SQL Developer installation directory (that is, the directory named sqldeveloper and all directories and files under it in the hierarchy).

If you also want to remove all user-specific SQL Developer information, you should also delete the directory under which that information is stored (that is, the SQL Developer user information directory). For the location of this directory, see Section 1.5.

If you have created a shortcut for SQL Developer, and if you do not plan to install SQL Developer into the same location again, you should remove that shortcut or modify the shortcut properties to reflect the new location.

1.11 SQL Developer Documentation

SQL Developer provides user documentation in the Oracle SQL Developer User's Guide and in the online help. To see the help, click the Help menu, or click the Help button or press the F1 key in relevant contexts while you are using SQL Developer.

In addition to the user's guide and installation guide, the following migration-related guides are available:

1.12 Oracle on the Web

Oracle provides a number of resources on the web. These are some sites you may find helpful:

Pl Sql Developer Oracle Client Not Properly Installed Oracle Home Key Fob

  • SQL Developer home page (OTN): http://www.oracle.com/technetwork/developer-tools/sql-developer/

  • SQL Developer discussion forum (OTN): http://forums.oracle.com/forums/forum.jspa?forumID=260

  • Oracle Technology Network (OTN): http://www.oracle.com/technetwork/index.html

  • PL/SQL page on OTN: http://www.oracle.com/technetwork/database/features/plsql/

  • Oracle Accessibility Program: http://www.oracle.com/us/corporate/accessibility/

  • Oracle Corporate site: http://www.oracle.com/



Similar Messages:
ADVERTISEMENT

Client Tools :: SP2-0310 / Unable To Open Temp File

Apr 14, 2012

when i run the script file 1.sqlIt throws me following error
SQL> @/c/temp/1.sql
SP2-0310: unable to open file '/c/temp/1.sql'

SQL & PL/SQL :: SP2-0310 - Unable To Open File When Running AWR Report?

Dec 1, 2011

When i run the awr report from sqlplus , i get below error message.
Quote:
SQL> select * from v$version;
BANNER
----------------------------------------------------------------
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
[code]////
Also i dont find the awrrpt.sql in the following path.
Quote:
$ pwd
/usr/local/oracle/product/9.2.0/rdbms/admin
$
$ ls -alrt awrrpt.sql
awrrpt.sql: No such file or directory
$
Is it something related to permissions on file ?

Client Tools :: Unable To Open Oracle 9 ISQL Window In Internet Explorer 6?

Oct 12, 2010

I am unable to open Oracle 9 iSQL window in internet explorer 6. And i have two oracle version installed in my system are 9i and 10g.Now i am able to open the iSQL windows of 10g but not the 9i. It's happen after installing the Oracle 10g in system.
how i open both the iSQL windows in my system the Oracle 9i and 10g

Server Utilities :: Unable To Open File And 503 File Not Found

Mar 30, 2008

I am trying to have sqlldr running against a file:
C:oratest20080318
Is it possible I get SQL*Loader-500: Unable to open file and 503 file not found just because the file name does not have an extension?
I can see that any file name I try it looks after whateverFileName.dat! Is there a way to have sqlldr working with files that do not have extensions?

Client Tools :: How To Open PL/SQL Developer With SQL WINDOW From Command Line

Sep 11, 2013

I am trying to run PL/SQL Developer from command line, So it can open with an opened SQL WINDOW by default, with a script (which I specify in the command ) already in it:
I've tried:
'C:Program Files (x86)PLSQL Developerplsqldev.exe' userid=andrey/andrey@mydb
but it just opens the application with a connection, no file.
*CORRECTION* While I was writing this post, I tried something , which is not so sophisticated, and it appeared to work..
C:Program Files (x86)PLSQL Developerplsqldev.exe' userid=andrey/andrey@mydb 'C:Program Files (x86)PLSQL Developerandrey.sql'

Client Tools :: ORA-01000 / Maximum Open Cursors Exceeded

Feb 7, 2011

I have a table by name DCODE.
I insert a row in it(TOAD) immediately after inserting it, if i try to delete it i am geeting an error saying ORA-01000: maximum open cursors exceeded.
I have tried to to solve this by increasing the value of OPEN_CURSORS. But still i get the same message.

Forms :: Unable To Open FMB File In Builder?

Jan 30, 2012

I am using forms 10.1.2.0.
I am try to open one .fmb file but file is not open in form builder.Its shows message 'cannot open file'.
I am going to help button its told that fmb in not create in that form builder. but that fmb is made in 10g but now is not open.

Client Tools :: ORA-06413 - Connection Not Open Error Oracle On 64-bit Windows

Jul 11, 2013

I have newly installed Oracle 11g R2 64 bits to window 8 PRo 64 bits. Able to connection successfully Oracle NEt Configuration Assistant service name.
But when I try to connect it Toad 9.6 32 bits its show error message
ORA-06413: Connection not open

Export/Import/SQL Loader :: 500 Unable To Open File

Jun 24, 2013

Lots of email alerts reporting SQL Loader failures (the data is actually loading) but I want to prevent all these email alerts being fired. We have an SQL Loader script that is failing regularly with this error, however the data does end up in the tables so it must run subsequently succesfully the log files are cleared out quite quickly so it is difficult to track the errors. Why is there no filename just a.day reference in the error log file?
Below is the shell script I do not have much script experience, so I am unable to see how I can alter this..could I add some kind of exclusive lock check to see if I actually have access to the file before SQL Loader tries to Load it?
value used for ROWS parameter changed from 64 to 63 SQL*Loader-500: Unable to open file (/e2e_ms_xfer/cent01/.dat) SQL*Loader-553: file not found SQL*Loader-509: System error: No such file or directory SQL*Loader-2026: the load was aborted because SQL Loader cannot continue.
This is the full error log file SQL*Loader: Release 11.2.0.3.0 - Production on Sat Jun 15 12:17:38 2013 Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved. Control File: /tmp/e2e_load_ms_raw_coda.ctl Data File:
/e2e_ms_xfer/cent01/.dat Bad File: /tmp/e2e_load_ms_raw_coda.bad Discard File: /tmp/e2e_load_ms_raw_coda.dsc (Allow all discards) Number to load: ALL Number to skip: 0 Errors allowed: 50 Bind array: 64 rows, maximum of 256000 bytes Continuation: none specified Path used: Conventional Table MS_RAW_CODA, loaded from every logical record. Insert option in effect for this table: APPEND TRAILING NULLCOLS option in effect Column Name Position Len Term Encl Datatype -----------CODA_RECORD FIRST 4000 CHARACTER Terminator string :
[code]..

Server Utilities :: SQL Loader Unable To Open File Error?

Mar 9, 2012

I am recieving errors when trying to load the control file. The errors are as follows:
SQL*Loader-500 Unable to open file (homework.ctl)
SQL*Loader-553 file not found
SQL*Loader-559 SYstem error: The system cannot find the file specified.
My control file is located directly in the C drive (C:homework.ctl). The control file contains the following
LOAD DATA
INFILE 'c:country.dat'
APPEND INTO TABLE homework
fields terminated by ',' optionally encloded by ''
(country, month, day)
WHEN (month='April')
The command I am entering is:
sqlldr system/password control=homework.ctl
I've tried c:homework.ctl, 'c:homework.ctl', and placing the file in the BIN folder of Oracle.

Client Tools :: Unable To Run SQL *Plus?

Oct 5, 2012

I'm not able to run SQL *Plus on my machine. It is giving me below error.
Error 6 initializing SQL*Plus
Message file sp1<lang>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory
Setting of PATH environment variable is as below. If I remove below highlighted part I'm able to run SQL * Plus. I cannot remove this because it is required to run my application.
C:oracleproduct10.2.0client_1in;C:OSIBANKDLLBIN;C:OSIBANKBat_Exe;C:OSIBANKDLL;c:Program Files (x86)InteliCLS Client;c:Program FilesInteliCLS Client;C:Program Files (x86)AMD APPinx86_64;C:Program Files (x86)AMD APPinx86;%SystemRoot%system32;%SystemRoot%;%SystemRoot%System32Wbem;%SYSTEMROOT%System32WindowsPowerShellv1.0;c:Program Files (x86)Microsoft SQL Server90Toolsinn;%TFSPowerToolDir%;%BPADir%;C:Program FilesIntelIntel(R) Management Engine ComponentsDAL;C:Program FilesIntelIntel(R) Management Engine ComponentsIPT;C:Program Files (x86)IntelIntel(R) Management Engine ComponentsDAL;C:Program Files (x86)IntelIntel(R) Management Engine ComponentsIPT;C:Program Files (x86)IntelOpenCL SDK2.0inx86;C:Program Files (x86)IntelOpenCL SDK2.0inx64

Server Utilities :: Data Pump Error - ORA-39070 / Unable To Open The Log File

Nov 1, 2006

I'm getting an error when trying to use the new Data Pump Export/Import utility.
I am able to create a directory using SQLPLus, and I get the 'Directory Created' message, but no directory actually gets created on the server.
SQL> CREATE DIRECTORY datapump AS 'C:Inetpubdatafiledatapump';
Directory created. But I dont see the directory created on the server.
Then on the server:
C:Documents and SettingsAdministrator>expdp ******/****** FULL=y DIRECTORY=datapump DUMPFILE=expdata.dmp LOGFILE=expdata.log
Export: Release 10.2.0.1.0 - Production on Wednesday, 01 November, 2006 1:51:55
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
ORA-29283: invalid file operation
ORA-06512: at 'SYS.UTL_FILE', line 475
ORA-29283: invalid file operation

Client Tools :: Unable To Compile The Triggers?

Jan 15, 2013

i have huge sets of triggers, when i try to compile any one of those it notifies me with below error
Error: ORA-00603: ORACLE server session terminated by fatal error
ORA-00600: internal error code, arguments: [kqlidchg1], [], [], [], [], [], [], [], [], [], [], []
ORA-00604: error occurred at recursive SQL level 1
ORA-00001: unique constraint (SYS.I_PLSCOPE_SIG_IDENTIFIER$) violated

Client Tools :: Unable To Login Through TOAD

Aug 17, 2010

ORA-00604:error occured at recursive SQL level 1
ORA-20501:Warning: Login Using <UNAME> Prohibited, Please contact GSD/DB-Services
ORA-06512: at line 73
I'm encountering the above msg while connecting to oracle through TOAD. While connecting through SQL * Plus I find no issues.
I'm using TOAD for Oracle 9.0.1.

Client Tools :: Unable To Drop Roles

Jan 10, 2012

When I try to drop the roles in dbartisan tool, I get an error saying 'Drop DDL for **_***********_ROLE has not been generated because it is a system object', but if i go to sql prompt and say 'drop role rolename', it is working. How do I remove the role in dbartisan itself?

Client Tools :: Unable To Use Toad And PL/SQL Developer

Jun 17, 2010

Due to company restrictions, i unable to use oracle third party tools such as toad, pl / sql developer etc except oracle sql developers. I heard Oracle Developer Tools for Visual Studio is best option to work oracle pl/sql and sql.

Client Tools :: Unable To Connect To Database?

Oct 4, 2013
Sql

I am getting error in my database..
SQL> conn scott/tiger;
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
I tried shutdown and startup
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Oct 4 22:31:06 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect /as sysdba
Connected.
SQL> shutdown;
ORA-01507: database not mounted
[code]..
ERROR at line 1:
ORA-01219: database not open: queries allowed on fixed tables/views only
SQL>

Client Tools :: Unable To Generate ERD For Specific Object

Dec 11, 2009

We are using erwin to generate Er diagram.But with that tool unable to generate the ERD for specific object.Or suggest any other tool from which i can generate the ERD of specific object.
i.e. Lets take an example.
I have a table with one primary key and 10 foreign keys. So now if i select the main table the tool should draw the ERD based on the Constraints ('P' and 'R') so all the different table which have the relation those table should only display. Right now we are getting all the tables ERD(more than 1500 tables) which is not neccesary.

Client Tools :: Unable To Connect To Oracle From Toad

Jul 28, 2010

I installed Oracle 10g XE and Toad 10.5 in my home system.I am able to connect to Oracle from Oracle XE homepage and XE SQL command line but when I try to connect to Oracle from toad 10.5 I am getting the error 'TNS: could not resolve the connect identifier specified (XE)'.From toad I tried direct and TNS options but it did not work. My tns ora file looks like below.
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Anu-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
)
)
TNS_ADMIN variable has correct parameter and Toad is directing the correct TNS file. I tried changing hostname with my system's ip but still I am unable to connect to Oracle from Toad.

Client Tools :: Unable To Get All Views In Crystal Report

Nov 11, 2008

One of my developer creating views in his own schema,we are able to see that views from sqlplusw. But we are unable view them from crystal report tool(CRW32) ,Except this schema all are visible..

Client Tools :: Unable To View Table Names

Jun 28, 2012

i'm working on sql developer in that i'm able to access tables if particular table name is given.
i don't understand is there any grant role problem .

Client Tools :: Unable To Print Query Output On TOAD

Jan 24, 2012

When i run the below mentioned query(similar query)on TOAD. It will run without any errors and i can see 'PL/SQL Procedure successfully completed' in the task bar...
However i am unable to see the output for the query.
print the the query output on TOAD ..
**** Sample Query Starts *****
DECLARE
i PLS_INTEGER;
BEGIN
SELECT NVL(i, 93)
INTO i
FROM DUAL;
--print i;
--dbms_output.put_line('i1: ' i);
END;
**** Sample Query Ends*****
**** Actual Query Starts *****
-----------------------------------------------------------------
DECLARE
UnxDate number(6);
MyResult number(6);
Todaysdate date := TO_DATE('17-01-2012 00:00:00','dd-mm-yyyy hh24:mi:ss');
BEGIN
SELECT ROUND (Todaysdate - TO_DATE('01-jan-1970','dd-mon-yyyy') ) INTO UnxDate FROM dual;
[code]...

Client Tools :: Unable To Set Font For Japanese In Grid Option

Mar 9, 2011

I have TOAD Version 10.5.1.3, and i want to see the Japanese font, for that i tried changing view->toad options->display->Fonts to 'Arial Unicode MS' and selected Script as 'Japanese' and click on Apply and OK. But the Script option is automatically changed to 'Western' ( not to 'Japanese').
set the font script to 'japanese'

Client Tools :: Unable To See Database List In Dropdown Of PL/SQL Developer

Mar 27, 2013

I installed Oracle 11g client and set the ORACLE_HOME and tns_admin env variables.I installed the pl/sql developer, but unfortunately after installing , i am unable to see any database details in the drop-down list of pl/sql developer.

Client Tools :: 10g On Windows 7 - Unable To Initialize Oracle Call Interface

Oct 16, 2013

I work with oracle 10g, on windows 7. sometime when i try to start my sqlplus in prompt command this message display.
C:UsersSony>sqlplus
SP2-1503: Unable to initialize Oracle call interface
SP2-0152: ORACLE may not be functioning properly
But the solution people have proposed into the forum are:
1 - check the environment variable Oracle_home and modify if it ending by '
2 - or try tho run my promt command as Administrator.
I try the both, but only the second works. while now i don't understand why it works when i start the promt command as Administrator and why it no works when i don't run it like administrator. Another thing is i am the only user of my computer, i have only one session (administor session).

Client Tools :: Oracle 10gR2 Database Server - Unable To Use Isqlplus?

Apr 11, 2007

I have installed Oracle 10gR2 database server recently in the Windows box. The database works fine. But I am unable to connect through the Internet Explorer. I found that the service for the isqlplus is not available. Do I need to run any script for creating the service?

Client Tools :: Unable To Insert Euro Symbol In Database With Character Set WE8MSWIN1252?

Mar 29, 2011

I am using oracle 9.2.0.6.0 on HP-UX.
I am unable to insert and even display euro symbol from server as well as windows client.
Following are the details of my database server
SQL> select * from nls_database_parameters;
PARAMETER VALUE
------------------------------ ----------------------------------------
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET WE8MSWIN1252
[code]..
1) When I try to insert € from Db server (using putty) using Alt+0128 it does not print anything (nothing gets typed on the screen). Not even junk characters Also following query does not print anything
SQL> select chr(128) from dual;
C
-
2) while I set NLS_LANG on client and try to insert €, Alt+0128 produces a question mark symbol And following query displays junk character
SQL> select chr(128) from dual;
C
-
Ç
3) Regardless when I inserted couple of rows and tried UNISTR following was the result
SQL> select unistr(v) from t;
Error 45 initializing SQL*Plus
Internal error
$

Client Tools :: Unable To Paste Header (column) Names Result To Excel

Jul 10, 2012

when i'm saving the result in excel sheet..results are saving but unable to paste column / header names.

Client Tools :: Database Won't Start / Unable To Initialize Oracle Call Interface

Mar 10, 2010

Pl Sql Developer Oracle Client Not Properly Installed Oracle Home Key West

I am facing the problem in windows 7. I have oracle client 10g installed. When i run sqlplus from comand prompt it gives the error as:
C:Userssrirams>sqlplus
SP2-1503: Unable to initialize Oracle call interface
SP2-0152: ORACLE may not be functioning properly
When I select the executable 'sql+' and run as administrator it works fine.